SHOP FOR ALL IRRIGATION SUPPLIES ON SPRINKLER WAREHOUSE
SHOP NOW

Home > Valves > Replace Valve Top and Internal Parts

Replace The “Top-Of-The-Valve” Using Parts From A New Valve Of The Same Make And Model

When you have a faulty valve, it is often better to buy another valve of the same model and use the top of the new valve to replace the valve top and internal parts. Plus a new valve is cheaper than if you buy the parts separately. This way you will end up with a new diaphragm, solenoid, and internal filters. You will have a new valve since the bottom body piece is only a PVC base and does not go bad. The trick is you must use the exact model valve as the old valve. You can’t replace the top and internal parts from a different model valve. If you can not find the same valve (if yours is so old that we do not have it online) then we suggest you replace the entire valve.

From low flow valves to high flow valves, clean water valves to dirty water valves, and low-pressure valves to high-pressure valves, Sprinkler Warehouse has it all! Browse our versatile lineup of sprinkler valves. With there being many different kinds of irrigation valves available, make sure to select the one that will give you the greatest return on your next project. Choose from popular brands such as K-Rain, Hunter, Rain Bird, Irritrol, Toro, Signature, and Weathermatic.