Conserving Water Troubleshooting Tips

This article explains some water conservation tips for cycle and soak water. It includes fast irrigation fixes as well as related articles. Summer is fast approaching and so is the relentless summer that can take a toll on your lawn and garden. A quick, weekly check of your irrigation system will help ensure you don’t run into bigger problems later on. Here are a few simple suggestions to help keep your sprinkler system in top shape.

5 Fast Irrigation Fixes

After mowing, use the “manual” setting on your sprinkler timer to turn on each sprinkler station for a couple of minutes at a time. Then walk around and visually check for these potential problems:

Misaligned heads: Adjust any sprinkler heads that may have shifted and are watering the street, patio, sidewalk or driveway.
Obstructed heads: Taller grass around sprinkler heads may block your intended spray pattern and prevent water from reaching your lawn or other plants. Make sure you have at least 3- or 4-inch pop-up sprinklers to fully clear taller grass. You may also need to trim back overgrown plant material that may be blocking the spray.
Broken parts: Look for parts that may have been broken by lawnmowers or foot traffic. Replace any broken parts, being sure to match the spray pattern and distance for peak performance. Shop for new sprinkler heads, including rotors, nozzles, tools adapters and more!
Clogged nozzles: Dirt, small rocks or other debris can occasionally clog sprinkler heads. If you notice any heads that appear clogged, simply turn off the zone, unscrew the nozzle, then rinse the nozzle and filter screen in some clean water. Once cleared, replace the nozzle and filter screen, checking to make sure the spray is aligned properly.
Head-to-head coverage: For even, efficient watering, each sprinkler’s spray should just reach the next sprinkler head. Under-spray may result in dry spots that can eventually turn brown, while over-spray wastes water.