Drip Emitters Split The Flow Of Water To Target Each Plant

These DIG 6 outlet drip emitters, also called manifolds, mount on a half-inch shrub stick or riser. They split the flow of water into 6 different directions, turning a single riser into a mini drip system. I’m Dwayne Smith your Sprinkler Warehouse Product Specialist. Let’s talk about drip manifolds.

Shop Drip Irrigation Emitter Manifolds At SprinklerWarehouse.com

These manifolds are perfect for watering individual shrubs, roses, or trees, and because they are drip irrigation they use  50 to 70 percent less water than a conventional sprinkler system. By watering only the root zone area of the plant, they help eliminate problems with pests, weeds water evaporation and runoff, and plant disease caused by overwatering.

Manifold With Pressure Compensating Emitters

These 6-outlet emitters are pressure compensating and each outlet delivers up to 6 gallons per hour of water flow. There are two versions of this manifold. The 06-604 has barbs that point down, and the 06-504 has 90-degree barbs that point out,  which is handy if you’re mounting this really close to the ground. These also swivel which are great for helping to point your emitter tubing in the direction that you want it to go.

Microtubing Connects To The Barbs

Quarter-inch micro tubing connects to each of these barbs. The micro tubing carries water to the root zone of your plants. Depending on the size of the planting one outlet may suffice for a small dense grouping. Or you may use one outlet per plant. For trees or large shrubs, you may need to use several outlets.

Manifolds can be installed above ground or you can place them underground inside a small valve box. To retrofit a sprinkler to a manifold. Unscrew the nozzle from the riser. Flush the lines for just a few seconds. Screw the manifold onto the riser. Run your micro tubing. Run your micro tubing from the manifold to your plants. Secure the tubing with stakes.

A Diffusion Cap Helps Provide A Barrier From Pests Entering Your Tubing

It’s a good idea to use a bug cap, also called a diffusion cap, on the end of the tubing. It helps to prevent erosion and prevents bugs from making their home in your tubes. If you find that the flow rate is too high for a particular outlet you can add a drip emitter that has a more appropriate flow rate for your plan. Any brand of the barbed emitter will. There are lots of emitters to choose from on our button drip emitters page.

Shop Drip Emitters & Manifolds At SprinklerWarehouse.com

Remember, Sprinkler Warehouse has everything for your irrigation needs so your trees, lawn, flower beds, and gardens are lush and beautiful. If you have any questions about our products chat with one of our amazing customer service agents at SprinklerWarehouse.com. They really know their stuff and they’ll get you squared away.

Subscribe to our YouTube channel for helpful tips, tutorials, and general sprinkler instruction. For Sprinkler Warehouse, I’m Dwayne Smith. Professional quality–Rock bottom prices.