The 5004-PLPC-R is an upgraded rotor with some amazing features. In this video, we’re going to discuss some of those features and we’re going to change out a nozzle and make some adjustments. I’m Your Sprinkler Warehouse product specialist. Let’s get started.
Top Features Of The Rain Bird 5004 Series
The 5000 series of Rotors by Rain Bird are some of our most popular rotors. They’re sturdy and reliable. This particular rotor has some added extras that make it exceptional. The 5000 Plus models, like this one, have flow shut-off capability, which allows you to shut off the flow of water to the individual heads, even while the system is still in operation. This allows you to change out a nozzle without having to turn off the system.
It’s also beneficial for new construction when some of the sod has been laid and needs to be watered, but there are still spots within the zone where sod has not yet been installed. Another upgraded feature of this particular model is pressure regulation.
Benefits Of Pressure Regulation In Sprinkler System
Pressure regulation saves water by preventing misting. If your sprinkler head is misting then much of your water is being carried away by the wind or evaporating before reaching your lawn’s roots.
Pressure regulation allows the nozzle to operate at optimum pressure and also prevents variation in pressure between heads for more uniform coverage. Now for some of the basics.
Various Adjustments Of The 5004 Rotor
The 5004-PLPC-R is a four-inch pop-up rotor with an adjustable arc or pattern. The arc is adjustable from 40 to 360 degrees. The inlet on this pop-up is three-quarter inches. This rotor comes with a set of rain curtain nozzles. Rain Curtain nozzles have a very even spray pattern. And they have larger water droplets which mean more water ends up on your lawn rather than getting blown away.
5004s have a watering distance of 25 to 50 feet depending on the nozzle installed and how the adjustment screw is set. Rain Bird rotors are dependable. They have the longest operating life cycle of any rotor on the market. Let’s talk about the various adjustments. You can use a rainbird tool like this one to make adjustments or you can use a small flathead screwdriver.
Looking at the top of the rotor. This is the radius adjustment slot where you adjust the distance of the spray. This is the pull-up slot. This is the arc adjustment slot where you can increase or decrease the arc. And this is the flow Shut-off slot. Now we’ll check out one of these that we’ve got installed outside.
How To Change The Nozzle Of Your Rotor
Here’s how to change out a nozzle. There are two easy ways to get to the nozzle on a rotor that’s already installed. One method is to pull up the riser by inserting the rain bird tool in the pull-up slot. Quarter turn and pull up. A Hold Up Nozzle Install Collar makes it easier to work on, but you can hold the riser up with your hand.
Since this rotor has a flow stop, the simplest way to access the nozzle is to turn on the zone. And shut off the water to the head using the flow stop slot. The riser stays in the up position which makes it easy to work on. Whichever method you choose.
You’ll need to back out the radius adjustment screw. Once it’s out of the way of the nozzle. Pull out the nozzle with a pair of needle-nose pliers or pry it out with a flathead screwdriver. Insert the new nozzle. And screw back down the radius adjustment screw.
Don’t try to tighten the screw…. You’re just getting it down in front of the nozzle to hold it in place. Now start the water either by turning on the zone or by using the flow shut-off slot. Using the radius adjustment screw, set your watering distance.
The spray from this rotor should reach the next rotor over. To adjust the arc, also called the pattern insert the Rain Bird tool or a flat-head screwdriver into the arc adjustment slot. Turn clockwise to increase the arc or counterclockwise to decrease.
Our customers love Rain Bird rotors because of their solid performance year after year. Order your 5000 Plus rotors today on SprinklerWarehouse.com.
